Road markings that stay visible when the light is gone
During the day it absorbs energy from sunlight or artificial light. As light levels drop, it gradually releases that energy as visible light: an additional guide on the road, with no power supply.
- No cables
- No batteries
- Zero energy use
Context footage: motorway at dusk. It does not show VIALCENDRA applied.
Charged by light. Glows in the dark.
The strontium aluminate–based photoluminescent pigment stores light energy and returns it as visible light when ambient lighting fades. It does not need vehicle headlights to be seen.
The emission gradually decreases through the night and depends on the light received during the day.

- 01 · By day
Absorbs energy
The road marking charges with the sunlight or artificial light it receives.
- 02 · As light fades
Releases the energy
It gradually emits visible light in yellow-green or blue-green.
- 03 · At night
Guides without power
It provides an additional visual reference for hours, with decreasing intensity and no cables or batteries.
Photoluminescence and retroreflection
Photoluminescence
Stores light and emits it later. It glows on its own, even without headlights.
Retroreflection
Returns light from an external source, such as vehicle headlights, thanks to glass beads. Without that source, it is not visible.
Both, in one marking
By dropping glass beads onto the still-hot marking, VIALCENDRA combines photoluminescence and retroreflection in a single solution.
Reflective paint is not photoluminescent. Retroreflection is optional and depends on applying glass beads; each property is assessed separately.

Night-time guidance where there are no streetlights
An additional visual reference on unlit routes, recharged by daylight.
Where lighting doesn't reach
Sections and spaces where a visual reference with no power supply adds extra guidance.
Roads and access routes
Selected sections with limited lighting.
Bends and junctions
Changes in alignment and intersections.
Pedestrian crossings
Crossings and pedestrian routes.
Greenways and cycle lanes
Night-time guidance on unlit routes.
Tunnels
A complementary visual reference.
Underground car parks
Bays, routes and exits.
Industry and logistics
Warehouses, yards and loading docks.
Wayfinding and evacuation
Warning zones and exit routes.
Have another use case?
Tell us about your projectUse at each site depends on the applicable regulations and on approval by the road or facility owner. In tunnels and evacuation routes it is a complementary reference: it does not replace required signage or lighting.
Underground car parks
It charges with the car park's own artificial lighting and keeps a visible reference on bays, routes and exits when light levels drop.
- Parking bay lines
- Traffic arrows and routes
- Exits and warning zones

Melt, mix and apply
It is handled like standard thermoplastic, with photoluminescence built in at the factory.
Factory pre-formulated
Delivered ready to melt and apply. No pigments to add and no on-site mixing.
Your existing equipment
Compatible with standard hot-melt thermoplastic preheaters and marking machines, by extrusion or screed.
Asphalt and concrete
Suitable for both surfaces, with proper preparation and primer.
Own light plus reflection
Photoluminescence, with the option of adding retroreflection using glass beads.
25 kg bags
Solid thermoplastic powder, easy to store and handle.
Project assessment
We calculate consumption and coverage for your section, surface and thickness.
The same process as standard thermoplastic
- 01
Clean and dry
A clean, dry surface with no standing water.
- 02
Set-out
Marking out lines, symbols or areas.
- 03
Primer
Where the surface requires it: concrete or aged asphalt.
- 04
Melting and mixing
In a preheater, stirred throughout heating.
- 05
Application
With a road marking machine, by extrusion or screed.
- 06
Glass beads (optional)
On the hot marking, to add retroreflection.
- 07
Open to traffic
As soon as the marking has cooled and set.
High-concentration grade
Formulated with 40% long-persistence photoluminescent pigment. Also available at 10%, 20% and 30% concentrations.
Request the full data sheet| Pigment | Strontium aluminate, long persistence |
|---|---|
| Emission colours | Yellow-green · blue-green |
| Excitation range | 200–450 nm |
| Afterglow* | ≥ 8 h, with decreasing intensity |
| Luminance in darkness* | ≥ 3 cd/m² |
| Recommended thickness | 1.0–2.5 mm |
| Water and alkali resistance | No defects after 24 h |
| No-pick-up time | 3 min |
| Supply | Thermoplastic powder, 25 kg bags |
| Shelf life | 12 months, in a cool, dry place |
* Declared values, subject to the test conditions in the data sheet. They are not a guarantee of on-site performance: glow and its duration depend on the light charge received, applied thickness, surface, wear and measurement conditions. We recommend validating them on a pilot section.
Test it first on your own road
We suggest starting with a limited trial to see real-world performance on your road before scaling up.
Propose a pilot section- 1 · SelectionWe choose a representative section together.
- 2 · ApplicationUsing standard thermoplastic equipment.
- 3 · MonitoringNight-time observation in real conditions.
- 4 · Roll-outResults and a proposal for the wider network.
What people usually ask us
If your question is not here, write to us and we will reply with the technical information available.
Is it the same as reflective paint?
No. Reflective paint returns headlight beams; photoluminescent paint stores light and emits it later, even with no headlights. VIALCENDRA lets you combine both by dropping glass beads onto the hot marking.
Does it need electricity or electrical maintenance?
No. It works with no cables, no batteries and zero energy use: it recharges with sunlight or artificial light.
How long does it glow?
It is a long-lasting effect whose intensity decreases gradually through the night. It depends on the light received during the day, which is why we suggest validating it with a pilot section. Data sheet values are declared values obtained under its test conditions.
What equipment do I need?
The usual hot-melt thermoplastic kit: a preheater and a road marking machine for extrusion or screed application.
Can it be applied on concrete?
Yes, with primer. New asphalt may not need it; on aged asphalt or concrete it is recommended.
How much material will I need?
Coverage varies with thickness, surface and application conditions. Ask us for a calculation for your project.
Does it replace required signage or lighting?
No. It is an additional visual reference. Its use at each site must comply with the applicable regulations and be approved by the road or facility owner.
Request a project assessment
For public authorities, contractors, road marking companies and facility managers. We reply with a technical study and a material estimate.